April 3, 2024
image
image
image

Rick took the existing electrical wiring diagram and updated it with the turnout move at Whittier siding and Eppley's Curve, as well as added Anchorage track 5 and Rudd Spur. Other minor changes were made as well. Rick printed the diagram on four different sheets of paper and glued them together, creating a beautiful 15"x21" rendition for John. You'll find get a large version here.

Although train night was put on hold while the Combs clan was in New Zealand and Australia for 26 days, Rick continued to show up on Wednesdays to work. He changed the wiring on Rudd Spur to operate with the dead man switch at the swing gate. Therefore, we can now park locomotives on this track and not have power to them when not in use.

AM-1 #11 which controls Anchorage track 5, has never had correct indicators for the two turnouts. Rick tracked this down to a setting on the controller. In the advanced setting mode, feedback needs to be enabled so the AM-1 gets the signal from the tortoise which determines correct display of the turnout's status.

image
image
image

Now the track 5 turnouts display the correct status.

During operation one of the hoppers was found to have a broken coupler. How did the knuckle to the coupler go missing? Does plastic get brittle over time? Who knows. Video: Snaking out of Eppley's Curve and passing Whittier depot, a 30 car consist heads to Anchorage for the day's delivery.
image
image
 
Video: Pulling a 30-car consist 3001/2005 pass a freight headed up by 2001/2004 in the siding .

Upcoming repairs:
- One of the handheld controllers refused to take a charge so we sent it back to Ring Engineering for repair. Long story, short they are selling us a brand new HC-3 for almost half off.
- GP40 numbers 3009 and 3010 are squealing so they are heading to the Eppley Shops for repair.
- One of the legs of the double crossover won't show the correct position for more than half a second. Wiring and configurations will be checked next week.

 

 

April 10, 2024
image
image
image

Video: A late Easter celebration brought The Invasion of the Grandsons. Each grandson got to chose his consist and then serve as engineer while the others add and subtract passengers from the locomotive. This is an activity that never gets old.

Video: Engineer Liam chose #1809 to head up the consist which was composed of rail cars chosen by uniqueness rather than functionality. He makes a brief stop to allow passenger to hop on board.

Video: The favorite trackside location is Dairy Queen. Most passengers embark and disembark from this ice cream nirvana.

image
image
image

Video: Engineer Shane favors a small consist with a heritage paint scheme locomotive. Another favorite activity is following the train with a Hot Wheels car. This activity NEVER gets old.

Video: Shane always takes his engineer responsibilities seriously. It is not usual to see him standing on a stool to monitor the train throughout its run. Grandpa reminds everyone to handle the controllers with care, especially when they are hopping off a stool.

One of the controllers was sent to the manufacturer for repair. Ring Engineering offered their new (third generation) controller at a heavily discounted rate instead of a repair. Well, heck yes! The new controller has some great new features:

  • Four customizable buttons
  • Soft Grip Knob
  • Lanyard eye ring
  • Smaller size and lighter weight
  • Twice the storage memory
  • Better battery retention when powered off
image
image
 
The Eppley Shops could not eliminate the squealing sounds in GP40 numbers 3009 and 3010. Tonight, Rick and John opened up the surplus locomotives box in storage and pulled out four unused locomotives. Dr. Frankenstein will perform some transplant operations over the week.

Video: One of Rick's favorite operations is reversing a train's direction through the double crossover. With that said, this train must be so long that the front and rear barely clears at the crossover. Some day he will probably orchestra a train with hair's width clearance.

 

 

April 17, 2024
image
image
image

Video: During the past week, the Eppley Shops removed the motor from GP40 #3014 and placed it in GP40 #3010. The squealing persisted. However, when trucks were swapped the noise went away. GP40 #3010 is shown here with original motor and swapped trucks. No squealing noise was present. The Eppley Shops will now check the squealing trucks for possible repair. Trucks are composed of side frames, gears, wheels, axles and clips so there shouldn't be much amiss.

Rick loves a challenge so finding proper car lengths that result in a hair's breadth clearance between locomotive and caboose at the double crossover is cause for delight. Click here for the video.

Video: A combination freight and coal train snakes through Divide near Triple Peaks mountain.

image
image

Video: Rick loves a challenge so using separate controllers, he ran trains opposite directions. Soon before a possible head on collision he brought GP38s 2001/2004 into Coastal siding (MP 110) so GP38 2005/GP40 3001 could pass. This maneuver may appear simple, but one controller must quickly run through several menus to change the position of the siding switch so the through train does not derail.

Casey Durand's Wilderness Express railcar's trucks were squeaking so John used newly purchased graphite to alleviate the problem. Success!  

 

April 24, 2024
image
image
image

Grandsons Shane and Cody skipped school to run locomotives on Clayton's Alaska Railroad. Truthfully, they were sick and grandpa and grandma were watching them. Cody was very specific regarding his consist, a log car and Princess railcar. Cody was very permissive and let passengers ride on the outside of the locomotive. They made stops at Dairy Queen and the sand house. Check out the video here.

John worked on Rudd Spur landscape filling it with a variety of trees, some made from bumpy chenille and others from Woodland Scenics Realistic Pine Trees Kits. Jackie and John created hundreds of bumpy chenille pine trees together and the forested area will henceforth be known as Jackie's Forest.

Railfans immediately flocked to the area to photograph the RDC at Rudd Spur amidst the pines.

image
image
image

Rick spent train night video taping different scenarios using his GoPro camera. He took some video passing through Jackie's Forest and another running a long train end-to-end over the double crossover. Click here for a video of his video train.

Video: This video shows the GoPro cocked to one side so a two train meet can be recorded. Next week Rick will have the downloads of the videos and these will be included with the train night report. Okay, just one more photo of the RDC at Rudd Spur amidst the pines of Jackie's Forest.

 

 

Feel free to contact me at john@alaskarails.org
Page created 9/4/17 and last updated 5/2
/24